From:
mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Ken W Stephenson
Sent: Thursday, May 12, 2005 10:54
AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 82
Imp
One more thing, Dick. On cleaning the nozzles,
the web page alludes to back flushing. How does one do that?
Unsolder the end plug?
That’s a new one on
me, Ken. I just squirt “Gunk” carburetor cleaner through the plumbing
until I get a good stream out of each of the 8 nozzles. It’s quick
and easy, but you do have to lift the nozzle assembly out of the HSA so you
can disassemble the little spring loaded regulator valves. Do this in a
clean, well lit place!
Dick.
