Re: dumb left hand studs

[<62-65-mail-list-club@xxxxxxxxxxx>]

Glad you got it solved! 

Correct on the front drums. That swage / cutter technique was shown in the link I previously sent on 9-26.

http://www.fordgarage.com/pages/swaging.htm

Thanks,
Gary H. 

>  -------Original Message-------
  
>  OK, got this taken care of today. I got the studs out of the rear axle
>  pretty easy with a propane torch, plenty of pb blaster and about 6
>  raps from a framing hammer. Came out pretty easy, But the front drum
>  was a different matter. I was getting scared so I took it in to a
>  machine shop i have used in the past for little jobs. Machinist had to
>  use a cutter to trim the swage away. Some little gadget in a drill
>  press that went around the base of the stud where it meets the drum .
>  He showed me the studs when they came out. Never could have done it
>  without cutting that away. You could see where the splines mushroomed
>  out. Kind of like a rivet.
>  Neal
>  
>  On Mon, Sep 28, 2020 at 2:21 PM Jason Rhoades < >
>  wrote:
>  
>  > I put the drum in a hydraulic press and the came right out!!!
>  > Don’t use a hammer will definitely mushroom!!
>  >
>  > Jason R
>  >
 
>  >
>  > On Sat, Sep 26, 2020 at 1:08 PM <62-65-mail-list-club@ >
>  > wrote:
>  >
>  >> Sounds like a good idea. Here's a Ford site that uses a swage
>  >> cutter to avoid using the sledge hammer approach.
>  >>
>  >> http://www.fordgarage.com/pages/swaging.htm
>  >>
>  >> Gary H.
>  >>
>  >>> -------Original Message------- 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20200929163642.31065.qmail%40server309.com.