Re: Radiator/ Electric Fan / Controller Help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Radiator/ Electric Fan / Controller Help



Enzo,

Thanks for the info. 

My issue seems to be airflow at idle, while driving down the road is fine. I do have a factory shroud but my current setup has the fan outside the shroud's mouth.

I managed to locate a .75" longer fan clutch over the weekend to hopefully get the fan into the shroud. Also found a fan blade thats 1" larger in diameter that should fill the shroud better. Im hoping that these with a new aluminum 2 row radiator with 1" or 1.25" tubes will fix me up.

Bill M 


On Mon, Mar 4, 2019, 7:25 AM Enzo Cremasco <csmopars@xxxxxxxxxx> wrote:
Hi Bill   I may be a  little late to the party
but here is the info I sent To David ;last year :

Hi David             I have the identical Hemi set up in my car 
it began life with an alum 3 row rad and (2) 10" plastic electric fans

it was warm and progressively got warmer   200-215 for a 25 mile ride on open roads

did some searching this winter '/ spring ….  finally settled on a Glen Ray Radiator unit c/w metal shroud and a

Hayden flex as per Bob Schirmer's recommendation   My temp now barely exceeds 180   (maybe 190 in traffic)

but all works to a tee and I now enjoy and trust driving the car again

hope this helps

Enzo
--------------------------------------------
On Thu, 2/28/19, Bill M <y1topbanana73@xxxxxxxxx> wrote:

 Subject: Radiator/ Electric Fan / Controller Help
 To: "62-65 Mopar List" <1962to1965mopars@xxxxxxxxxxxxxxxx>
 Date: Thursday, February 28, 2019, 8:20 AM

 Even though I've always
 stuck with stock style configurations when it comes to
 anything to do my car, I'm tired of being scared of
 sitting in traffic, and watching my temperature
 rise. 
 I'm seriously thinking about getting an
 aluminum radiator and electric fan combination (never used
 one before). So far I'm leaning towards Champion
 radiators (lifetime warranty), three core set up, and a 16
 in single Spal puller fan, and harness w/controller. The
 above package is $500 shipped.
 But I'm a little concerned about their
 harness and as it seems to have some light wiring
 gauges.
 https://www.championradiators.com/Single-Fan-Relay

 https://www.championradiators.com/Thermostat-relay-kit-instruction


 Not sure whether I should maybe use a
 "Spal" harness and controller like
 this...
 https://www.jegs.com/p/SPAL/SPAL-Electric-Fan-Wiring-Harness-Kits/2861422/10002/-1

 The other issue is that the above controllers
 have a set temperature (185 on I believe). Should i use a
 programmable setup like this instead if i want to tweak the
 temp?
 https://www.speedcooling.com/wiring-kits/

 Any insight would be appreciated.
 Thanks
 Bill M 




 --

 You received this message because you are subscribed to the
 Google Groups "The 1962 to 1965 Mopar Mail List
 Clubhouse" group.

 To unsubscribe from this group and stop receiving emails
 from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.

 For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.