RE: Radiator/ Electric Fan / Controller Help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Radiator/ Electric Fan / Controller Help



Enzo,

Would you post your application, pictures and part numbers or links.

Thanks,

Ric

-----Original Message-----
From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Enzo Cremasco
Sent: Monday, March 04, 2019 4:25 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: Re: Radiator/ Electric Fan / Controller Help

Hi Bill   I may be a  little late to the party
but here is the info I sent To David ;last year :

Hi David             I have the identical Hemi set up in my car  
it began life with an alum 3 row rad and (2) 10" plastic electric fans 

it was warm and progressively got warmer   200-215 for a 25 mile ride on open roads

did some searching this winter '/ spring ….  finally settled on a Glen Ray Radiator unit c/w metal shroud and a

Hayden flex as per Bob Schirmer's recommendation   My temp now barely exceeds 180   (maybe 190 in traffic)

but all works to a tee and I now enjoy and trust driving the car again

hope this helps 

Enzo
--------------------------------------------
On Thu, 2/28/19, Bill M <y1topbanana73@xxxxxxxxx> wrote:

 Subject: Radiator/ Electric Fan / Controller Help
 To: "62-65 Mopar List" <1962to1965mopars@xxxxxxxxxxxxxxxx>
 Date: Thursday, February 28, 2019, 8:20 AM
 
 Even though I've always
 stuck with stock style configurations when it comes to  anything to do my car, I'm tired of being scared of  sitting in traffic, and watching my temperature  rise.  I'm seriously thinking about getting an  aluminum radiator and electric fan combination (never used  one before). So far I'm leaning towards Champion  radiators (lifetime warranty), three core set up, and a 16  in single Spal puller fan, and harness w/controller. The  above package is $500 shipped.
 But I'm a little concerned about their
 harness and as it seems to have some light wiring  gauges.
 https://www.championradiators.com/Single-Fan-Relay
 
 https://www.championradiators.com/Thermostat-relay-kit-instruction
 
 
 Not sure whether I should maybe use a
 "Spal" harness and controller like
 this...
 https://www.jegs.com/p/SPAL/SPAL-Electric-Fan-Wiring-Harness-Kits/2861422/10002/-1
 
 The other issue is that the above controllers  have a set temperature (185 on I believe). Should i use a  programmable setup like this instead if i want to tweak the  temp?
 https://www.speedcooling.com/wiring-kits/
 
 Any insight would be appreciated.
 Thanks
 Bill M 
 
 
 
 
 -- 
 
 You received this message because you are subscribed to the  Google Groups "The 1962 to 1965 Mopar Mail List  Clubhouse" group.
 
 To unsubscribe from this group and stop receiving emails  from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
 
 For more options, visit https://groups.google.com/d/optout.
 

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.