So I have a set of long rams. And I would love to put them on my 65 coronet. But the passenger side inner fender would have to be modified for sure. And that is why I have not done it. however I love they way the cars run with rams on them. I had my set on my 62 Newport with the 361. I did not leave them on very long as I had air cleaner issues and ultimately didn’t want to run the engine without air cleaners. But the engine liked the rams for sure!!!! If you look the factory used a hotter cam with the rams. Usually people think they should run a low rpm torquer cam. But actually the factory ran I bigger cam. Those rams will flat scream as they come in/out of tune. They come into “tune” about 3000-3200 and you can feel it start working about 2000 rpm. I usually cruise about 2800-3000 rpm. Or did in my Newport. Usually put me about 65-75 depending on gear and tires as I had changed that. Well I was playing around. People just do not expect a 62 Newport to jump and run away from them like that car would. I would have people run me down just tell me how cool that was. Then id pop the hood and watch their eyes bug out!! Sold the Newport and kept the rams.
Well that’s been my experience with rams so far. O forgot to say the Newport had “buckets” in the fender well for clearance for the rams from the factory so was super easy to install
Jason Rhoades
Vice President
883 S. 900 E.
Pierceton, In. 46562
Ph. (574) 594-2685
Fax (574) 594-5899
www.cottagewatchman.com
From: dodger7998 via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Friday, August 3, 2018 12:23 PM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: Re: 413 Cross Ram Info Needed
the crossrams will fit all of the B engines
In a message dated 8/2/2018 8:46:55 AM Central Standard Time, 1962to1965mopars@xxxxxxxxxxxxxxxx writes:
good question...I have a 1960 413 / donor was a Chrysler 300-F
stock single 4bbl /With/ Holley 750 DP/ Mec secondary's....and it goes!...
and smaller carb is SLOWWW... ;
V.
On Thursday, August 2, 2018, 8:24:45 AM CDT, Jerry L Pullin Jr <jerrypullinjr@xxxxxxxxxxxxxx> wrote:
Is there anything special and or difference between the short & long intake systems?
Can they be put on any 413 Mopar engine?
If I come across any should I get it/them?
What do they go for?
Thank You!
Jerry
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
Back to the Home of the Forward Look Network
