Re: Motor mounts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Motor mounts



steve,

you broke poly-lock motor mounts?  wow.
i'm curious when your pinion yoke broke if that caused the mounts to break with your drive shaft flailing about at speed.  if that is the case i would check your trans mount also.
i see a torque strap in your future.


mike

On Thu, Jul 6, 2017 at 1:30 AM, MO <micher@xxxxxxxxxxxxxxx> wrote:
Today, I find that I have a separated motor mount on the left and a  right one that is torn. These were in the Schumacker  big block into a 318 K frame kit.  I have had them for about three-four  years, and very few miles last Fall and so far this year.  I admit, I was abuseing them  with a few  " launches"  Schumacker does not have the mounts in stock and I see they are out of stock on about all motor mounts. It appears they are made by Imperial Services.  I do not want the Chinese made ones. I found a pair of OEM  motor mount isolators on e-bay.  Doesn't that mean, made by the company that supplied Mopar and therefore made in USA? 
 With the issues mentioned in this thread, I don't think I want to try expensive polyurathane or lock type mounts , nor solid mounts.  So, I am going with the stock mounts and the Schumacker torque "strap" ........................MO


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.