Installed Dual Master Cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Installed Dual Master Cylinder



The old single bowl master cylinder of death was leaking on my 65 Coronet so I decided to upgrade to a dual one from a 67 Coronet.  Question is, the metal block where the lines split front to back only has 1 line going to the MC.  I am assuming there is a different block that would have 2 lines out to the MC.  I did a google search but found only proportion valves but as of now I am keeping it drum/drum and they are for disc/drum correct?

Thanks & sorry if this question was asked before, I searched but not knowing the technical name of the metal block is hindering me! 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.