Re: Installed Dual Master Cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Installed Dual Master Cylinder
- From: Timothy Arnold <timna74@xxxxxxxxx>
- Date: Sat, 22 Dec 2012 20:44:09 -0800 (PST)
Finally got around to putting this in. What port on the MC does the front/rear brakes to go? I have been reading a lot & seems like it's 50/50, I read somewhere that the one closest to the firewall is for the front brakes & the farther one is for the rear. I plumbed it like that but wanted to make sure I did it right before I bleed the brakes.
Thanks
Tim
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
Back to the Home of the Forward Look Network