Re: EARLY PUSHBUTTON 727 OUTPUT SHAFT BEARING FOUND
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: EARLY PUSHBUTTON 727 OUTPUT SHAFT BEARING FOUND



UPDATE - I just received a call from the bearing seller. He found a box of ten buried for 20 years in his warehouse. I snagged all ten and they will shortly be on the way. I don't expect the boxes to be mint, but if they are not rusty or damaged I will contact all 8 of you that wanted first shot of the one extra I have already. I'm going to use one and think I will keep only one for a spare and sell the rest.  If all 10 are good and I don't have to throw any away, they will be $39 each shipped to a US address, as my cost is $34 and USPS flat rate priority is now $5.55

Give it 4-5 days to get here.    More then.




On Friday, September 28, 2012 2:34:21 PM UTC-7, G-Dog wrote:
Don't know if this topic has been discussed before, but I just went through the search from hell trying to find an output shaft bearing for a 63 727 with the stock bolt on output flange style tail housing. This bearing is NLA and the only one I found was in SERBIA !!!

After some cross referencing, a metric bearing was found to have the exact dimensions.....only there were only two available across the US and I bought them both from the single supplier that had them in hand.

If anyone is interested in the one Im not going to use, send me an email. This will fit 64 and earlier 727 tail housings only!

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.