Re: success at last

["beckstein@xxxxxxxxxxx" <beckstein@xxxxxxxxxxx>]

I think I want to seperate the drum...The drivers side is already
seperatedand I'd like to get new drums.
I read the article about cuttin the studs, drilling out the stud and
removing. I feel for the price of new drums/studs its
not a big deal. Although I'm new to auto repair I'm adventurous!



On May 16, 11:00 pm, "centerline1...@xxxxxxxxxxx"
<whittak...@xxxxxxxxxxxxxxxxxxx> wrote:
> The "correct" method of separating the drums and hubs would be to use
> a swedge cutter to remove the swedge and then press the studs out and
> replace them.  However, very few machine shops have swedge cutters
> anymore. The easy solution is to cut the lugs off flush with the
> outside of the drum and then press them out. This removes the swedge
> so it won't damage the hub but will require replacing the drums...
> which is probably a good idea anyway.  65 drums are very affordable
> and available at any Napa store as are new non swedge style wheel
> studs.
>
> When you reassemble everything just use a little anti-seize on the
> inside of the hub before you put it back on. If you ever have to
> remove it again it will be a lot easier this way.
>
> Bill
> Bastrop, TX
>
> On May 16, 8:04 pm, "Gary H." <62to65mo...@xxxxxxxxxxx> wrote:
>
>
>
> > Yup, at times these are very, very stuck. Congratulations are in order!
>
> > The hub is swedged to the drum so do you really want to remove it? Don't unless it is unusable as is. There are some tips on the 62-65 Tech page about the cohabitation of wheel studs and drum.
> T> Thanks,
> > Gary H.
>
> > >  -------Original Message-------
>
> > >  You may not want to try that on your on.
> > >  Don't ruin the hub.
>
> > >  Jimmy
>
> > >  On 5/16/2012 4:42 PM,   wrote:
> > >  > Well it took me 2 weeks but I finally was able to remove the left rear
> > >  > drum on my 64 Dodge 440......WTF........

-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.