Re: 8 3/4" rear end housing info

["Gary H." <62to65mopar@xxxxxxxxxxx>]

I think some of the confusion is that the "Mopar Performance Chassis Manual" published by Ma Mopar provided some measurements that listed perch and track measurements. The perch numbers are easy to measure but the track (the distance between the two tires) are not because it includes part of the tire track. The 62-70 B Body track number in that book was 59.2. Which, as Dave and others have pointed out, gives a false sense that 62-70 Bs 8.75 were equal width, which they are not.  

Okay, then. I have what I am almost certain (99%) is a 1966 Plymouth B body 8.75. I can measure it and take some pictures of the measurements and post them. Maybe we can eventually "grow" an accurate chart with the help of others here.    

Thanks,
Gary H. 
>  -------Original Message-------
>  From: Dodger7998 
>  
>  I agree,,,,, most of the lists I have seen are not correct, most like to
>  lump all the B-Bodies together, and although they are close, they are not
>  the  same, only ones I remember for sure were 63 and 65 where I found the
>  65 to be  3/4 inch wider, or 3/8 on each side.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.