From: Bill M <y1topbanana73@xxxxxxxxx>
To: mml@xxxxxxxxxxxxxx; 62-65 Mopar List <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Wednesday, January 4, 2012 1:21 PM
Subject: Poly Block Update-Not So Great
Good news is that I got a call from the machine shop and my Poly block
has been hot-tanked and is ready to be picked up.
Bad news is he said the #3 main spun the bearing "REAL BAD" and he's
concerned about whether
the block will be usable. He said at a minimum
it will have to be align bored, but he's not sure that will take care
of the issue.
So...how can I be sure whether this block will accept mains without
spending alot of money first? Anything else that can be done without
breaking the bank to possibly fix it???
Bill M
65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
73 Dart Sport, 00 Cherokee Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 92 Accord, 06 Mazda 3
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965
Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
Back to the Home of the Forward Look Network