Re: Stubborn ball joints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Stubborn ball joints



Bless your heart Ben.....it don’t get no better!
Ollie
 
From: Ben Morgan
Sent: Sunday, August 28, 2011 11:02 PM
Subject: Stubborn ball joints
 
The upper ball joint socket tool arrived and I tried it out with a breaker bar and an extension pipe. The ball joint absolutely would not budge. So time to use the heavy duty air gun, which would require the use of the big air compressor that I use with the 15K generator that I have mounted in back of the rusty old GMC that I use as a tool truck.
The truck has not been used all summer so it would not start. Worked on that for a while and got her running. Then it would not move. Oh no, low on trans fluid, where did it go? Hunted down some trans fluid and got the old truck moving.
Got the truck moved in place and now the generator wil not start. Tracked it down to the carb, of course. Thought it may be full of gunk so tore it down, but carb's fine. Turns out to be the carb activiation/shut off valve. Now I need to hunt that part down.
Still have not removed the ball joint.
And such is the life of the back yard car hobby enthusiast and how we enjoy our week-ends
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.