Re: Overheating Stumped...

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

Yeah, put a three row core back in it.

Jimmy

On 8/13/2011 12:32 PM, Bill M wrote:
> So I'm trying to diagnose the issue that's causing my new 4-core
> radiator to make the car run hotter than with my previous 3-core
> radiator. Not only does it run hotter at cruising, but it starts
> getting hot IMMEDIATELY upon stopping at a light to the point of being
> scary.
>
> Basically the only thing I changed id the radiator. Car is 318 Poly
> with a mild cam, 7 blade fan, fan clutch (confirmed working), no
> shroud (never had one), now new 180 deg high-flow t-stat, spring in
> lower hose.
>
> The symptom I cant figure out now is...after testing things today and
> keeping an eye on temps w/ a laser thermometer, I turned it off to let
> it cool and scratch my head. When the rad, and upper hose had cooled
> to ~165, the lower rad hose was dead cold. I pulled it off and there
> is no restriction in the hose or the pump. I looked in the water pump
> from below and don't see anything up there either. It's not leaking
>
> Any thoughts??
>
> Bill M
> 65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
> 73 Dart Sport, 00 Cherokee Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
> 21 Model T Depot Hack, 92 Accord, 06 Mazda 3

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.