Re: Brake woes

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

I am a member of the Forward look website ( all finned Mopars 55-61) 
Somewhwere in the forums, this procedrure has been discussed a few times.

Your wheelstuds and axlehub stays together. You simply install the drum 
over the studs and hub, the wheel clamps it all together like a later flange 
hub does. I have not personaly had to do that yet, but it makes sense to 
me.Good Luck..................MO   BTW did you locate that brake shop I 
recommended? I can call a friend and get the name if you need
{Steve Mick}
http://stevemick1964dodge.shutterfly.com/pictures/5
----- Original Message ----- 
From: <62pluckedchicken@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, April 13, 2011 8:49 AM
Subject: RE: Brake woes


> I searched the Internet, and found a post removing/install the hun on
> drums, saying "grind off or drill through the rivets" but the discussion
> on installing on the new drums says that rivets aren't needed... how
> does the hub stay in place on the new drums?
> Gary H. wrote:
> > Kantor's version is probably just the drum. As you say, the picture
> > indicates so as well.
> >
> > I'll continue to look through the archive files for the procedure if you
> >
> > get stuck.
> >
> > Thanks,
> > Gary H.
> >
> >
> > 62pluckedchicken  wrote:
> > >
> > > I'll give him a call, and see what he says about removing the hubs.. I
> > > wonder if the one from Kantor don't have the hubs either. The part
> > > picture doesn't show th hub
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.