RE: '62 rear drums

[62pluckedchicken@xxxxxxxxx]

I think he may have made his own puller... there is a puller listed on 
1962to1965mopar.ornocar.com?  

Is it on the Vendor page?
Afterhours Fabrication wrote:
> 
> Maybe his puller just isn't good enough? Did you check out the puller
> thats listed on the site made for taking the drums off? I snapped the
> bleeder off in my rear wheel cyl as well on my '62, and was able to
> get the drums right off with a normal 3-jaw puller. I made small
> notches in the lip on the drum to get a little better bite. Car sat
> for 18years before I got it and really didn't have too much trouble
> with it.
> 
> - Dave
> 
> 
> 
> On Fri, Mar 11, 2011 at 11:07 AM,  <62pluckedchicken@xxxxxxxxx> wrote:
> >
> > anyone know a good rear drum source for a '62 chrysler?
> >
> > I snapped the bleed valve off one of the rear wheel cylinders, and have
> > to get the drums off.
> >
> > I've thrown in the towel, took my '62 to a mechanic... even with a
> > puller he can't get the drums off.
> >
> > looks like he may have to destroy the drums to get them off, so I'll
> > need replacements.
> >
> > let me know if you have a line on brake drums.
> > Thanks
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > dir=
> ectly to that person. =A0I.e., send parts/car transactions and 
> negotiations=
>  as well as other personal messages only to the intended recipient, not 
>  to =
> the Clubhouse public address. This practice will protect your privacy, 
> redu=
> ce the total volume of mail and fine tune the content signal to Mopar 
> topic=
> . =A0Thanks!
> >
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> > http://www.1962to1=
> 965mopar.ornocar.com/general_disclaimer.html.
> >
> >


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.