Re: valve springs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: valve springs



Im sure Mancini etc. has something.

--- On Wed, 10/27/10, MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx> wrote:

> From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx>
> Subject: valve springs
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Wednesday, October 27, 2010, 11:27 PM
> 
> Tech question--On a chebrolay you can change valve springs
> without removing the heads by using a simple tool. and air
> pressure in the cylinder to keep the valves closed. ---Is
> there a way to change valve springs without removing the
> heads in a Mopar 440 engine?  Thanks for any
> help................................MO
> {Steve Mick}
> http://stevemick.shutterfly.com/pictures#Part%202 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> 





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.