Well, thanks for bursting my big bubble Steve. Just joking. Really thanks for all the good info. I really appreciate it. With my budget, I think the old reliable trans that is in her, will be what I use. Unless, I find out that I am Donald Trumps long lost son or something.
Thanks Dooner -------------------------------------------------- From: "Steven Charette" <stevec@xxxxxxxxxxxxxxxxxxxx> Sent: Monday, October 11, 2010 6:51 PM To: <1962to1965mopars@xxxxxxxxxx> Subject: RE: Overdrive into a 62 mopar
Dooner, The travel from Reverse to Park is longer than the travel between the rest of the gears (on the manual valve). I don't know that it would even work using Reverse for Park, not using the Neutral button, having the Drive Neutral, etc. You'd just have to try it and see, I guess. One other (albeit pricey) method that I neglected to mention earlier is to use the Retrotek Speed Smart Shift system - it is basically an electronically driven linear actuator that is driven by a custom control unit with switches for buttons. We designed and built a switch-pack thatattaches to the OE pushbutton shifter that actuates the Smart Shift controlunit. Looks stock from the cabin but is whiz bang from the button unit down. It requires two separate buttons to engage "Park" but has a host of other features like indicators, etc. Read all about it here if you are so inclined... http://www.retrotekspeed.com/products/smart-shift/smart-shift-stand-alone/ You can even order F1 style shift paddles if that blows your hair back. Total expenditure is around 1500 beans... I'll stick with my old cables and buttons on my budget! I like your idea of using the Park Lock lever for a battery disconnect, although I particularly enjoy handing my '64 over to valets atthe casinos then watching the crowd gather as they try to figure out how tomove it. But I guess anybody trying to steal the car would know how to shift it! Come to think of it, it would be simple to install a switch on, saythe "First" button, that would require you to hold the "First" button in (asfar as it will go with the Park Lock lever engaged) to enable the neutral start switch so the starter will crank. Nevermind, forget I mentioned that. Shhhh. SC -----Original Message----- From: Dooner Funderburk [mailto:doonerfunderburk@xxxxxxxxx] Sent: Monday, October 11, 2010 7:07 PM To: 1962to1965mopars@xxxxxxxxxx Subject: Re: Overdrive into a 62 mopar Steven, I am wondering if the original pushbuttons can be used by just using the buttons alone, not using the park lever. My thought is to use the reversebutton as park, the neutral button as reverse, the drive button as neutral,the second button as overdrive, and the first button as drive. I don't see any future need for me to drop it down past drive, as my car will be for cruising and not racing. I even thought about getting the buttons remarkedwith the right gear position on it, but I might just keep it as original soit would be hard for someone to drive my car unless they knew. I even thought the park lever could be a battery disconnect switch. So you would have to raise it up to start the car.What are your thoughts on that? And if anyone else has any thought, ring'emon in please. Dooner -------------------------------------------------- From: "Steven Charette" <stevec@xxxxxxxxxxxxxxxxxxxx> Sent: Monday, October 11, 2010 4:27 PM To: <1962to1965mopars@xxxxxxxxxx> Subject: RE: Overdrive into a 62 moparDoug, There are a couple ways to go - Gear Vendors makes a unit that will attach to a '66-up TorqueFlite and there is always the A-500/518. The conversion does work with 1 cable, but with slightly increased button effort - the original pushbutton setup uses a lightweight cable with the moving parts submerged in nice warm transmission fluid, where the conversion moves all the moving parts to the outside of the trans. You can also just use the parking brake and use R-N-D-2-1 without modifying the button assembly. They drove pushbutton TF's from '56-'61 and just used the parking brake - no different than a stick car. SC -----Original Message----- From: beth [mailto:dickens@xxxxxxxxxxxxx] Sent: Friday, October 08, 2010 9:07 PM To: 1962to1965mopars@xxxxxxxxxx Subject: Overdrive into a 62 mopar Has anyone tried to put an automatic overdrive into our cars. I'm considering doing this behind my 318 but would like to keep the pushbuttons. I know the button assembly can be modified but does it use 1 cable to work the trans lever with the buttons/park lever or both. Doug B. [Non-text portions of this message have been removed] ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions andnegotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions andnegotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.---- Please address private mail -- mail of interest to only one person --directly to that person. I.e., send parts/car transactions and negotiationsas well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.