Re: Overdrive into a 62 mopar
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Overdrive into a 62 mopar




Steven,
I am wondering if the original pushbuttons can be used by just using the buttons alone, not using the park lever. My thought is to use the reverse button as park, the neutral button as reverse, the drive button as neutral, the second button as overdrive, and the first button as drive. I don't see any future need for me to drop it down past drive, as my car will be for cruising and not racing. I even thought about getting the buttons remarked with the right gear position on it, but I might just keep it as original so it would be hard for someone to drive my car unless they knew. I even thought the park lever could be a battery disconnect switch. So you would have to raise it up to start the car. What are your thoughts on that? And if anyone else has any thought, ring'em on in please.

Dooner

--------------------------------------------------
From: "Steven Charette" <stevec@xxxxxxxxxxxxxxxxxxxx>
Sent: Monday, October 11, 2010 4:27 PM
To: <1962to1965mopars@xxxxxxxxxx>
Subject: RE: Overdrive into a 62 mopar


Doug,
There are a couple ways to go - Gear Vendors makes a unit that will
attach to a '66-up TorqueFlite and there is always the A-500/518.

 The conversion does work with 1 cable, but with slightly increased
button effort - the original pushbutton setup uses a lightweight cable with
the moving parts submerged in nice warm transmission fluid, where the
conversion moves all the moving parts to the outside of the trans.

You can also just use the parking brake and use R-N-D-2-1 without
modifying the button assembly. They drove pushbutton TF's from '56-'61 and
just used the parking brake - no different than a stick car.

SC

-----Original Message-----
From: beth [mailto:dickens@xxxxxxxxxxxxx]
Sent: Friday, October 08, 2010 9:07 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Overdrive into a 62 mopar



Has anyone tried to put an automatic overdrive into our cars. I'm
considering doing this behind my 318 but would like to keep the pushbuttons.

I know the button assembly can be modified but does it use 1 cable to work
the trans lever with the buttons/park lever or both.

 Doug B.
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.





----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.











Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.