RE: Poly Stroker project

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

My alum rad has the trans cooler but I don't use it in order to help 
keep the rad cooler. I have a big B&M unit right behind the grill and on 
the driver side. I used flex lines to attach mine too. I know you have 
an issue with where to put the cooler due to the fan set-up. It oughta 
work. My rad is ample as it is almost too cold when driving. BUT I have 
an airflow problem without a shroud and/or bigger fan. If I can build a 
shroud I will. Otherwise i may search for an electric fan combo that 
will replace my flex-fan and encapsulate the radiator for better airflow 
exchange.
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
====================================================================
Nick Tiberio wrote:
> 
> Rich,
> 
> The cross flow radiator does not have an internal tranny cooler. It was 
> to have gone in front but after negotiations with the radiator it moved 
> to the back. The tranny lines are flexable with a fabric cover to reduce 
> 
> heat. My '63 tranny still uses an external filter so that was relocated 
> up front near the radiator away from the headers catching some air to 
> reduce heat. I used the largest practical cooler to reduce tranny fluid 
> heat. Now at the same time keeping the tranny fluid out of the radiator 
> I hope to reduce my radiator's heat. We'll try our best and go from 
> there.
> 
> Nick Tiberio
> 
> 
> 
> 
> Rich Kinsley wrote:
> > 
> > Umm, Umm!  Mighty purty! Or should I say Mighty and purty :-) 
> interesting that you put the trans cooler inside the engine bay. I guess 
> 
> 
> > you are planning on a putting a pusher fan in front of the radiator??
> > 
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> > ===================================================================
> > Nick Tiberio wrote:
> > > 
> > > 1963 Plymouth Fury making progress since the early spring. Engine and 
> > > front end out, painted engine compartment, poly stroker engine/trans, 
> > > suspension are in and this past week finished up on the cooling system. 
> > > Trunk mounted battery and wire harness are next.
> > > 
> > > A few photos here of the progress.
> > > 
> > > http://s329.photobucket.com/albums/l380/FuryUs63/Poly%20Stroker/?start=all
> > > 
> > > 
> > > 
> > > 
> > > 
> > > Nick Tiberio
> > > furyus63
> > 
> > 
> > 
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> 
> 
> 
> furyus63



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.