RE: A990 seat brackets
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: A990 seat brackets



Gary,
	Definitely not a Toyota drive, this one stopped just fine :P

SC 

-----Original Message-----
From: Gary H. [mailto:spigot2039@xxxxxxxxxxx] 
Sent: Tuesday, March 09, 2010 7:01 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: A990 seat brackets


Yes Bostrum Viking Companion seats were used. They were modified so the back
would fold frontward, unlike the rigid truck seats. And they used unique
fine grain vinyl.

The Summit link worked but, beyond the fabric, the top of the backrest on
the Summit seat looks more square than the original A990 versions look like
to me. I suppose an upholstery guru could fix that. 

Thanks for the Garland link. Good to see it again. 

And sorry to hear about the laptop! Was it a TOYota hard drive? :-P ;-) 

Thanks,
Gary H. 


-----Original Message-----
 
>Okay, well here's a little grist for the mill... I thought I sent a 
>reply to this the other night but it must not have gotten sent before 
>my laptop expired with a loud SNAP.
>
>It seems that recently someone on here mentioned that the seats were 
>made by Bostrum, and were as used on the A-100.  Besttop makes a seat 
>that looks similar (not exact, but close enough for most 50 year old 
>memories) and sells them through Summit and others.  They're listed in the
Jeep section.
>Here is a link (which will probably not work well, so search
>Summitracing.com):
>
>http://www.summitracing.com/parts/BST-39429-01/?rtype=10
>
>At one time they were available in vinyl, but I see only fabric now.
>
>There are photos of the seat brackets on this site featuring the 
>restoration of the '65 "Texas Rattler" car.  Great story on this one...
>
>http://www.garlandmotorsports.com/65-super-stock.html
>
>Anyway, hoping we can come up with a set of drawings - have a couple of 
>new CNC machines to play with and am ready to go!
>
>SC


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.