RE: Rear Seal Installation Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Rear Seal Installation Question



Thanks Gary,

I still have one old style seal in a gasket kit but Fel-Pro should know 
what they are doing, I'm going to install the new seal.

Good to see that I am not the only one who is concerned about the seal 
design change.

Per the instructions the side seal will just be RTV.  They supply two 
pipe cleaner things that get soaked in water and inserted in the RTV 
side seals.  RTV needs moisture to cure and I guess this must work.

Thanks Again
Dennis

spigot2039@xxxxxxxxxxx wrote:
> 
> Maybe this will help:
> 
> http://www.hemmings.com/mus/stories/2009/03/01/hmn_tips2.html
> 
> http://www.moparmusclemagazine.com/techarticles/mopp_0608_rebuilding_mopar_440_engine/photo_09.html
> 
> 
> You are not alone, by the way. See:
> http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=5349752&an=0&page=0
> 
> 
> 
> Thanks,
> Gary H.
> 
> 
> -----Original Message-----
>  
> >I have a new seal, 
> >
> >Fel-Pro BS 40240
> >
> >http://www.jegs.com/i/Fel-Pro/375/BS40240/10002/-1#
> >
> >This seal kit is completely different than any of the other seals I have 
> >
> >installed.  It does not have the side gibs, per the instructions the gap 
> >
> >is filled with sealant.
> >
> >It would be appreciated if someone would follow the link above and 
> >comment on this seal.  The kit may just be a universal kit but it has 
> >parts that do not appear to have a function in a 383.
> >
> >Thanks
> >Dennis C. 



1996 Dodge Ram 3500 Van Conversion
1964 Plymouth Belvedere 318 Auto
1963 Plymouth Sport Fury 383 4-speed
1949 Dodge Pickup 289/C4 soon to be changed
1998 Honda Valkyrie Standard


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.