Re: Rear Seal Installation Question

["Gary H." <spigot2039@xxxxxxxxxxx>]

Maybe this will help:

http://www.hemmings.com/mus/stories/2009/03/01/hmn_tips2.html

http://www.moparmusclemagazine.com/techarticles/mopp_0608_rebuilding_mopar_440_engine/photo_09.html

You are not alone, by the way. See:
http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=5349752&an=0&page=0


Thanks,
Gary H.


-----Original Message-----
 
>I have a new seal, 
>
>Fel-Pro BS 40240
>
>http://www.jegs.com/i/Fel-Pro/375/BS40240/10002/-1#
>
>This seal kit is completely different than any of the other seals I have 
>installed.  It does not have the side gibs, per the instructions the gap 
>is filled with sealant.
>
>It would be appreciated if someone would follow the link above and 
>comment on this seal.  The kit may just be a universal kit but it has 
>parts that do not appear to have a function in a 383.
>
>Thanks
>Dennis C. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.