RE: Cam Question

[Butch Edison <waedison@xxxxxxxxxxx>]

I've done the same thing. /Butch/Ferndale, WA

-----Original Message-----
From: Nico Over [mailto:nover@xxxxxxxx] 
Sent: Thursday, November 26, 2009 8:04 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: Cam Question


Forget my last post, I am a dummy, I had the engine at TDC Not firing when I
first got into it. Looked again today and verified that I now am 180 out 
which I will change tomorrow. I feel like a fool. I should know better. Nico

Thu, 26 Nov 2009 10:32:05 -0500, Nico Over wrote
> Hi and Happy Thanksgiving to all. My 63 Dodge MW Clone (440 block) 
> has never run correctly, always started well but it seemed the 
> engine wasn't all there even though it was firing on 8. Tore into it 
> this week for a cam change and found that the timing marks were 180 
> out on the cam gear, the marks were aligned with the dot at top 
> position of both the crank and cam gears at TDC. I would have 
> thought that with the marks aligned as such the car wouldn't even 
> run. Anyone ever experience this and were your symptoms the same. 
> Any thoughts would be appreciated. Thanks Nico Over Va. Beach, Va PS 
> I did not build this motor, it came in the car!
> 
> ----
> Please address private mail -- mail of interest to only one person --
>  directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will 
> protect your privacy, reduce the total volume of mail and fine tune 
> the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.