Re: master cylinder bore size

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

I converted a 66 Belvedere to manual front disc brakes using A Body parts 
and a 1 1/32" bore MC and it worked great. I believe the MC was for a 76 
Volarie with disc brakes.

Dan


----- Original Message ----- 
From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, August 19, 2009 4:06 PM
Subject: Re: master cylinder bore size


> Please excuse for butting in, but what would be a recmmendation for a 64 
> Dodge 440 converting to disc brakes front- drum brakes rear without power 
> boost? Of course dual reservoir Thanks for a 
> reply,,,,,,,,,,,,,,,,,,,,,,,,MO
> ----- Original Message ----- 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.