Re: one wire alt.

[Gary <mopar413@xxxxxxxxxxx>]

No advantage really.   You most likely would have to go with a chevy alt and then make up brackets.  The mopar altonator works just fine >  
---- Don Dulmage <big-d@xxxxxxxxxxxx> wrote: 
> 
> no
> Don
> ----- Original Message ----- 
> From: "Jack Cheek" <jcheek@xxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Sunday, March 29, 2009 8:51 PM
> Subject: one wire alt.
> 
> 
> 
> 
> hi all
> im redoing my 63 dodge polara 500 h.t.
> had a 383 in it now has a 440 bored .030 with max wedge top end.
> i have electronic ignition.
> what alt. would be best  60 or 90amp..if i wanted to go with a one wire set 
> up what would i have to do differnt to get that to work and is there really 
> any advantage with the one wire set up.
> thanks for your help.
> thanks jack
> 
> ----- Original Message -----
> From: Herb <zephyr9900@xxxxxxxxxxx>
> Date: Sunday, March 29, 2009 19:18
> Subject: RE: Temp Problems Gone
> To: 1962to1965mopars@xxxxxxxxxx
> 
> >
> >
> > Use a condenser from an old window AC unit for a tranny
> > cooler.  They are
> > all around if you look, and work great.  The price is
> > certainty right.  Don
> > t go to big on your alternator, remember the wiring in your 64
> > is built for
> > 35 amp 60 amp would be the limit I would push it.  Supt to you!
> >
> >
> >
> >    
> >
> >  Herb
> >
> >
> >
> > 1959 Coronet 326 Poly
> >
> > 1963 Fury 2D/HT 6.1
> >
> > 1963 Sport Fury Convertible 361
> >
> > 1970 Challenger RT 440
> >
> > 1999 Durango SLT 5.9
> >
> > 2006 300-C Heritage 5.7
> >
> > 2008 SRT-8 Magnum 6.1
> >
> > St. Louis, MO.
> >
> >
> >
> >
> >
> > -------Original Message-------
> >
> >
> >
> > From: Rich Kinsley
> >
> > Date: 3/29/2009 3:42:41 PM
> >
> > To: 1962to1965mopars@xxxxxxxxxx
> >
> > Subject: RE: Temp Problems Gone
> >
> >
> >
> > Nice post. I'm old enough, 65, to enjoy the "ramblings".
> >
> >
> >
> > About the radiator/trans, I take it you installed an aluminum radiator
> >
> > without a trans cooler hook-up? Dodger did this too. That's what
> > I am
> >
> > contemplating. We are both wondering how well it will work.
> > There are
> >
> > those radiators readily available for about $165 new. Whereas
> > the Be
> >
> > Cool is about $900. I already have a Flow Kool pump but maybe I
> > need to
> >
> > drill the relief holes too in the stat.
> >
> >
> >
> > Alternator wise I am going your route but I'm planning to switch
> > from my
> >
> > stock 35 amp to about a 60amp. They are easy to find for about
> > $55-$75.
> >
> > I don't mind going to a 100amp but so far I haven't seen any
> > listed that
> >
> > I thought would fit. Anybody know what year and make 100amp that would
> >
> > bolt up to my poly?
> >
> >
> >
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> >
> >
> >
> > =====================================================================
> >
> > Ollie wrote:
> >
> > >
> >
> > >
> >
> > > Computer problems, vehicle problems, rain water problems
> > !!  That is the
> >
> > > big thing in life. solving problems. But I am back. So here
> > comes a
> >
> > > rambling from Ollie..and I do love to read others ramblings.
> > Is this one
> >
> > > of the things of getting older?
> >
> > = = = = = = = = = = = = = = = = =  = = = = =  = = = =
> > =  = = = =  ==
> >
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> >
> >
> >
> >
> >
> > ----
> >
> > Please address private mail -- mail of interest to only one
> > person --
> > directly to that person.  I.e., send parts/car transactions
> > and negotiations
> > as well as other personal messages only to the intended
> > recipient, not to
> > the Clubhouse public address. This practice will protect your privacy,
> > reduce the total volume of mail and fine tune the content signal
> > to Mopar
> > topic.  Thanks!
> >
> >
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> >
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one
> > person -- directly to that person.  I.e., send parts/car
> > transactions and negotiations as well as other personal messages
> > only to the intended recipient, not to the Clubhouse public
> > address. This practice will protect your privacy, reduce the
> > total volume of mail and fine tune the content signal to Mopar
> > topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> > --
> >
> >
> >
> 
> --
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and negotiations 
> as well as other personal messages only to the intended recipient, not to 
> the Clubhouse public address. This practice will protect your privacy, 
> reduce the total volume of mail and fine tune the content signal to Mopar 
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
> 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER