No. The timing cover says 200 inch lbs abd water pump 30 ft lbs Sent from my Verizon Wireless BlackBerry -----Original Message----- From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx> Date: Mon, 27 Jul 2009 18:53:06 To: <1962to1965mopars@xxxxxxxxxx> Subject: Re: Timing Cover Might that have been 30 INCH pounds?..................MO ----- Original Message ----- From: "Brian Safford" <hzf9vv@xxxxxxxxx> To: <1962to1965mopars@xxxxxxxxxx> Sent: Monday, July 27, 2009 8:40 AM Subject: Timing Cover >I managed to strip the threads on 2 of the 3 bolt holes on the timing > chain cover while re-installing it. My shop manual says 30 ft-lbs for > those bolts; seems like that was a bit much for them. > > Do the timing covers from newer models interchange with the 62 poly 318? > > Regards, > Brian > '62 Dart 440 4-door/Poly 318 > ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. --^---------------------------------------------------------------- This email was sent to: hzf9vv@xxxxxxxxx EASY UNSUBSCRIBE click here: http://topica.com/u/?bUrDWg.ceLa0I.aHpmOXZ2 Or send an email to: 1962to1965mopars-unsubscribe@xxxxxxxxxx For Topica's complete suite of email marketing solutions visit: http://www.topica.com/?p=TEXFOOTER --^----------------------------------------------------------------