Re: Timing Cover
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Timing Cover




Might that have been 30 INCH pounds?..................MO
----- Original Message ----- From: "Brian Safford" <hzf9vv@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, July 27, 2009 8:40 AM
Subject: Timing Cover


I managed to strip the threads on 2 of the 3 bolt holes on the timing
chain cover while re-installing it.  My shop manual says 30 ft-lbs for
those bolts; seems like that was a bit much for them.

Do the timing covers from newer models interchange with the 62 poly 318?

Regards,
Brian
'62 Dart 440 4-door/Poly 318



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.











Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.