Re: Mopar 15"ers?

[wmp4@xxxxxxxxxxxx]

William Paxton
wmp4@xxxxxxxxxxxx

        I stand corrected. I thought that the later style had a bigger 
size dogdish than the early ones.



Wakeman Massie <wakey@xxxxxxxxxxx> 
01/12/2009 06:18 PM
Please respond to
1962to1965mopars@xxxxxxxxxx


To
1962to1965mopars@xxxxxxxxxx
cc

Subject
Re: Mopar 15"ers?







The early (late 40's - mid 50's) "smooth" convex 15" wheels do have the 
same 
center stamping diameter as the late-50s / early 60"s wheels (larger OD, I 

want to say 12 9/16"), using the same rim-shells should you wish to widen. 

I have done it many times and they definitely look cool...  but they do 
not 
fit any dog-dish caps.  These wheels are very common in yards around here.

'66 and later 15" wheels fit later, smaller diameter dog-dish caps that 
are 
incorrect for our cars.  If the gentleman in England is concerned with 
correctness, these wheels should be avoided.  If not, these wheels are 
cheap 
and available on every streetcorner.

Wakeman


----- Original Message ----- 
From: "Schuyler Wrobel" <sky62@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, January 12, 2009 2:26 PM
Subject: Re: Mopar 15"ers?


>
> also, it's my understanding, that the early style wheels have a  smooth 
> convex center. which is harder to find.
> the later style steel wheels have an extra concave in them.
> then there's the cop car 15 x 7.5" or 7"? theyt sort of look like  chevy 

> rally wheels. with slots cut into the center piece.
>
> on my car I have the smooth early style 15" on the back, not sure of the 

> width. my front wheels are the later model style 15 x 7.5".
> I use the cop car style dog dish caps that have the holes in them.
>
> I also found some nice later model wheels off a big mid 70's  Chrysler, 
in 
> the junk yard.  I think might be 8" wide (hard to  measure with the tire 

> on).
> I got them because they looked almost brand new, or at least the one  in 

> the trunk look like new. which by the way might be a good place to  look
> when searching the bone yard, check the spare.
>
> Schuyler 62 Dodge Dart 440 wagon w/ Poly 318
>  <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
> FYI - I Do the Decal designs for the Poly head 318 and more! email me 
> with your needs -
>  <sky62@xxxxxxxxxxxxx>
>
>
>
> On Jan 12, 2009, at 9:56 AM, Wakeman Massie wrote:
>
>>
>> These wheels aren't hugely common but with a little digging, you  can 
>> find a set.  I have spent a lot of time looking....
>>
>> In '62-'65 Mopar made 4 different variants of the 15" steel wheel,  all 

>> of which will fit the dog dish cap:
>>
>> 15 x 5.5" (special order dodge, plymouth, #1856808)
>> 15 x 6" (chrysler, all except station wagon, #2200928)
>> 15 x 6.5" (imperial, all, #2122478)
>> 15 x 6.5 (ambulance, limo, #2260158)
>>
>> This being said, I have had the best luck looking on '56 - '61 Chrysler 

>> corp vehicles, In particular, station wagons and fully  loaded cars 
Just 
>> get out in the 'yard and follow the chrome... and  remember to bring a 
>> dog-dish with you to check the register...
>>
>> There are more widths and variants than listed above, as mentioned 
>> already you will find these on the earlier cars.  In fact my last  few 
>> finds have all been 15 x 4.5", which are from before 1962 but  perfect 
>> for front runners with a 6.70 x 15" tire.
>>
>> Of course, all you need is the center, if you find a good center  you 
can 
>> have it re-rimmed in any width you want by a good wheel  shop such as 
>> TruDesign Wheel or Stockton Wheel - making a smashed  junkyard wheel 
>> perfectly usable for our purposes.  I had 15 x 7"  rears built for the 
>> back and they look 100% factory.  And no, you  can't have the common 
14" 
>> wheel re-rimmed using a 15" rim shell,  the center is a different 
>> stamping.  I actually have seen it done  but it looks pretty bad...
>>
>> Good luck.
>>
>> Wakeman
>>
>> ----- Original Message ----- From: "Robert (UK)" <r.lane@xxxxxxxxxx>
>> To: <1962to1965mopars@xxxxxxxxxx>
>> Sent: Monday, January 12, 2009 8:03 AM
>> Subject: Mopar 15"ers?
>>
>>
>>>
>>> Hi all
>>>
>>> Further to the recent brief discussion on Studebaker 15" steel wheels
>>> being a suitable alternative to Mopar 15" steels, for fitting the 
early
>>> dog dishes....
>>>
>>> What Mopars were fitted with the 15" wheels that these hub caps are
>>> suppose to fit?
>>> As far as I know, passenger cars didnt come with 15's till a few years
>>> later, so was it vans/campers/pick-ups etc?
>>> Can anyone be specific?
>>> If so, what widths did they come in?
>>>
>>> I'm hoping someone over here has a set tucked away off an old pick- up 

>>> or
>>> similar....
>>> Hoping....
>>>
>>> Thanks
>>>
>>> Robert
>>> 63 Polara 500
>>> England
>>>
>>>
>>> ----
>>> Please address private mail -- mail of interest to only one person  -- 
 
>>> directly to that person.  I.e., send parts/car transactions  and 
>>> negotiations as well as other personal messages only to the  intended 
>>> recipient, not to the Clubhouse public address. This  practice will 
>>> protect your privacy, reduce the total volume of  mail and fine tune 
the 
>>> content signal to Mopar topic.  Thanks!
>>>
>>> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>>> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>>>
>>
>>
>> ----
>> Please address private mail -- mail of interest to only one person  -- 
>> directly to that person.  I.e., send parts/car transactions and 
>> negotiations as well as other personal messages only to the  intended 
>> recipient, not to the Clubhouse public address. This  practice will 
>> protect your privacy, reduce the total volume of mail  and fine tune 
the 
>> content signal to Mopar topic.  Thanks!
>>
>> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html. -- 
>> ^----------------------------------------------------------------
>> This email was sent to: sky62@xxxxxxxxxxxxx
>>
>> u/? 
bUrDWg.b9CW8O.c2t5NjJA
>> 
>>
>> 
>> 
>> 
>>
>>
>
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will 
protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>
>
> 


----
Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and 
negotiations as well as other personal messages only to the intended 
recipient, not to the Clubhouse public address. This practice will protect 
your privacy, reduce the total volume of mail and fine tune the content 
signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


 

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.