The gear is held onto the shaft by a fancy c-clip. I might have a spare clip and a spare gear. Also, there is a flat strap the bolts to the case to hold the gear head into the tranny. I can photo that to you. If I have second spare of a color or clip, I'll be glad to sell if for reasonable price. What is your gear count? Akron Don ________________________________ From: Mike Phelps <mikeph@xxxxxxxxxxxxx> To: 1962to1965mopars@xxxxxxxxxx Sent: Tuesday, December 9, 2008 1:21:08 AM Subject: Speedo gear Hi all. Is the gear on the trans end of the speedo cable replaceable and if so who has it? My cable is not broke but there is a flat spot on the gear. Is there a hold down bracket or clip that holds the cable in the trans? Mine was just stuck inside probably bouncing around on the output shaft, no wonder it's tore up. Mike Phelps 1965 Plymouth Belvedere II Convertible 361/727 2004 Hemi Ram Quad Cab 2004 Chrysler 300M 3.5HO 2004 PT Cruiser 2.4 Turbo ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. -- [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.