Re: Speedo gear

[Donald Gallimore <dongallimore@xxxxxxx>]

The gear is held onto the shaft by a fancy c-clip.  I might have a spare and a spare gear.  If I have second pare of a color or clip, I be glad to sell if for reasonable price.  What is your gear count?

Akron Don




________________________________
From: Mike Phelps <mikeph@xxxxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Tuesday, December 9, 2008 1:21:08 AM
Subject: Speedo gear


Hi all. Is the gear on the trans end of the speedo cable replaceable and 
if so who has it? My cable is not broke but there is a flat spot on the 
gear. Is there a hold down bracket or clip that holds the cable in the 
trans? Mine was just stuck inside probably bouncing around on the output 
shaft, no wonder it's tore up. 

Mike Phelps
1965 Plymouth Belvedere II Convertible
361/727
2004 Hemi Ram Quad Cab
2004 Chrysler 300M 3.5HO
2004 PT Cruiser 2.4 Turbo


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.