Re: chrome valve covers

[chymar01@xxxxxxxxxxx]

http://www.herbsparts.com/
Herb had some a couple years ago. ya might try giving him a call.


-------------- Original message -------------- 
From: Gary Pavlovich <glpavlovich@xxxxxxx> 

> 
> Wayne, 
> 
> Your best source would be to have your existing valve covers chromed. 
> You may check your local re-chrome shops for pricing. If you run into 
> problems or need another quote on rechroming I can check our local shop for 
> pricing for you. Additionally, I do have a set of the ultra-rare Edelbrock 
> finned aluminum valve covers for the Poly but they are expensive. 
> 
> Take care, 
> Gary Pavlovich 
> ----- Original Message ----- 
> From: "William Lewis" 
> To: <1962to1965mopars@xxxxxxxxxx> 
> Sent: Saturday, April 19, 2008 5:55 PM 
> Subject: Re: chrome valve covers 
> 
> 
> > 
> > Wayne, if you have the original 318 that came with your car from the 
> > factory, it is the "A" engine, otherwise known as the "wideblock" or 
> > "poly" due to its polyspherical (semi-hemi) heads. The '66 up 318's which 
> > began as 273 cube motors, are known as the "LA" engines and today's 5.2 & 
> > 5.9 liter motors are the latest versions of the "LA" motors. Later "A" 
> > 318's had 2 bolt valve covers, while earlier 318's (& the even earlier 
> > 277-301-303-313s) had 3 bolt valve covers. Edelbrock used to make a nice 
> > ribbed valve cover for our "A" motors, but don't think there are any new 
> > sources for chrome valve covers today. 
> > 
> > Jack Lewis 
> > 1956 Plymouth Fury 
> > 1962 Dodge Polara 500 
> > ----- Original Message ----- 
> > From: "Wayne Huseby" 
> > To: <1962to1965mopars@xxxxxxxxxx> 
> > Sent: Saturday, April 19, 2008 6:01 PM 
> > Subject: chrome valve covers 
> > 
> > 
> >> 
> >> I am looking for a source for chrome valve covers. I have a 64 318 with 
> >> 2 hold down bolts. Most parts stores I have checked look at me in 
> >> disbelief when I tell them on 2 hold down bolts. Is this 318 considered 
> >> and A engine. I did a google and someone mentioned the 318 A engine with 
> >> 2 valve cover bolts. If this is different than other 318s what else 
> >> might be unique about them and why is it called an A engine. 
> >> 
> >> Wayne Huseby 
> >> 64 polara 500 2dr ht 
> >> 
> >> 
> >> ---- 
> >> Please address private mail -- mail of interest to only one person -- 
> >> directly to that person. I.e., send parts/car transactions and 
> >> negotiations as well as other personal messages only to the intended 
> >> recipient, not to the Clubhouse public address. This practice will 
> >> protect your privacy, reduce the total volume of mail and fine tune the 
> >> content signal to Mopar topic. Thanks! 
> >> 
> >> '62 to '65 Mopar Clubhouse Discussion Guidelines: 
> >> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> >> 
> >> 
> > 
> > 
> > ---- 
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person. I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic. Thanks! 
> > 
> > '62 to '65 Mopar Clubhouse Discussion Guidelines: 
> > 
> > 
> > 
> > 
> 
> 
> ---- 
> Please address private mail -- mail of interest to only one person -- directly 
> to that person. I.e., send parts/car transactions and negotiations as well as 
> other personal messages only to the intended recipient, not to the Clubhouse 
> public address. This practice will protect your privacy, reduce the total volume 
> of mail and fine tune the content signal to Mopar topic. Thanks! 
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines: 
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
> 
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.