Re: chrome valve covers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: chrome valve covers



${top_text_ad}
I picked up a pair of them on Ebay.  They show up from time to time.
Bob K


----- Original Message ----
From: Gary Pavlovich <glpavlovich@xxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Saturday, April 19, 2008 10:17:00 PM
Subject: Re: chrome valve covers


Wayne,

Your best source would be to have your existing valve covers chromed.
You may check your local re-chrome shops for pricing.  If you run into 
problems or need another quote on rechroming I can check our local shop for 
pricing for you.  Additionally, I do have a set of the ultra-rare Edelbrock 
finned aluminum valve covers for the Poly but they are expensive.

Take care,
Gary Pavlovich
----- Original Message ----- 
From: "William Lewis" <reatawhippets@xxxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, April 19, 2008 5:55 PM
Subject: Re: chrome valve covers


>
> Wayne, if you have the original 318 that came with your car from the 
> factory, it is the "A" engine, otherwise known as the "wideblock" or 
> "poly" due to its polyspherical (semi-hemi) heads.  The '66 up 318's which 
> began as 273 cube motors, are known as the "LA" engines and today's 5.2 & 
> 5.9 liter motors are the latest versions of the "LA" motors.  Later "A" 
> 318's had 2 bolt valve covers, while earlier 318's (& the even earlier 
> 277-301-303-313s) had 3 bolt valve covers.  Edelbrock used to make a nice 
> ribbed valve cover for our "A" motors, but don't think there are any new 
> sources for chrome valve covers today.
>
> Jack Lewis
> 1956 Plymouth Fury
> 1962 Dodge Polara 500
> ----- Original Message ----- 
> From: "Wayne Huseby" <wchuseby@xxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Saturday, April 19, 2008 6:01 PM
> Subject: chrome valve covers
>
>
>>
>> I am looking for a source for chrome valve covers. I have a 64 318 with
>> 2 hold down bolts. Most parts stores I have checked look at me in
>> disbelief when I tell them on 2 hold down bolts. Is this 318 considered
>> and A engine. I did a google and someone mentioned the 318 A engine with
>> 2 valve cover bolts. If this is different than other 318s what else
>> might be unique about them and why is it called an A engine.
>>
>> Wayne Huseby
>> 64 polara 500 2dr ht
>>
>>
>> ----
>> Please address private mail -- mail of interest to only one person --  
>> directly to that person.  I.e., send parts/car transactions and 
>> negotiations as well as other personal messages only to the intended 
>> recipient, not to the Clubhouse public address. This practice will 
>> protect your privacy, reduce the total volume of mail and fine tune the 
>> content signal to Mopar topic.  Thanks!
>>
>> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>>
>>
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>
>
>
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://ww-----------------------------


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.