4 speed hump

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

Galen decoded my car for the previous owner and his report shows that it 
was a factory 426 street wedge with a 4 speed.  One of the things that 
always amazed me is the crude hole in the floor above the transmission.  
It looks like someone at the factory took a torch and blew a hole in the 
hump in the floorboard, and then welded on the 4 speed hump.  Is that 
typical of a factory 4 speed installation?  It sure looks crappy.  
BTW....The previous owner did replace some of the floorboards, but not 
in that area above the transmission....Brian

'64 Belvedere
Davenport, Iowa

"The difference between ordinary and extraordinary is that little 
extra."


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.