RE: carb problems

[Sean B <polecat2@xxxxxxxx>]

Doug, I have seen this problem before, usually on aluminum, spread-bore 
intakes using square-bore carbs.  The squeal is coming from the base of 
the carb not sealing completely to the intake face.  Edelbrock makes a 
thin, metal plate to correct this, but I have fixed it by using a thick, 
wide mounting gasket.  Sounds like a she-demon got caught in the carb, 
right?

Sean


Doug Jacobsma wrote:
> 
> I have a Carter AVS on my '63 which I just put a kit in.  I put it back 
> on today, and fired it up, and got a high pitched squeal


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.