RE: carb problems

[Doug Jacobsma <big_jake57@xxxxxxxxxxx>]

> To: 1962to1965mopars@xxxxxxxxxx> From: polecat2@xxxxxxxx> Subject: RE: carb problems> Date: Mon, 22 Oct 2007 03:23:44 +0000> > > Doug, I have seen this problem before, usually on aluminum, spread-bore > intakes using square-bore carbs. The squeal is coming from the base of > the carb not sealing completely to the intake face. Edelbrock makes a > thin, metal plate to correct this, but I have fixed it by using a thick, > wide mounting gasket. Sounds like a she-demon got caught in the carb, > right?> > Sean>   Sure does sound like that.  I'll pull the carb and have a look.  It is mounted on a cast-iron square bore intake, and I am using the thick gasket already, but who knows.  This gasket has the metal rings around the bolt holes, where the old one did not.  Could this be a problem ?
 
Thanks
 
Jake, 
'63 Sport Fury 'vert........ with a she-demon
 
_________________________________________________________________
Peek-a-boo FREE Tricks & Treats for You!
http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.