Re: 65 Kickdown Adjustment

["Don H." <mopar4me@xxxxxxxxxxx>]

Bill - make sure the carb
----- Original Message ----- 
From: "Bill" <Y1TopBanana73@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, August 07, 2007 9:18 AM
Subject: 65 Kickdown Adjustment


> Is there a certain method to adjusting the kickdown linkage on my 65? My
> Coronet seems to short shift first and is very difficult to get to
> downshift from 3rd to 2nd. I basically have to floor it to get it to do
> the 3-2 shift. Also in town, unless I come to a COMPLETE stop, I'll take
> off out of the turn in 3rd gear 98% of the time. I adjusted the kickdown
> rod longer just like I have in the past w/ other vehicles, and it helped
> a LITTLE, but I didn't want to put to much pre-tension on the adjustment
> because I know that can cause problems.
>
> Thanks
>
> Bill M
> 65 Coronet 500 'vert
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.