RE: TTI Max Wedge exh system

[Robert <r.lane@xxxxxxxxxx>]

Brian Schlump wrote:
> 
> 
> Robert wrote:
> Has anyone out there fitted one of TTI's 3" MW systems on their 62-65 B 
> body?
> 
> Robert, I have TTI's 3" MW exhaust system on my '64.  It fit in easily 
> and I really like the sound of the Dyno Max mufflers compared to the 
> Flow Masters I had on my '68 GTX.  The Flow Masters were way too loud 
> inside the car at highway speeds.  I have people crawling under the car 
> at most shows to look at the TTI exhaust.  
> 
> The only concern I have with the 3" system is that the emergency brake 
> cables rub on the exhaust pipes whether I run them under or over the 
> pipes.  I think the original exhaust systems were 2 1/2" diameter, and 
> there were extra cable guides closer to the front of the car which kept 
> the cables from rubbing on the top of the pipes. Even if I installed the 
> 
> extra guides on my car, I still think that the cables would rub on the 
> 3" pipes.  Maybe someone else could clarify if I'm correct about that 
> observation...Brian
> 
> '64 Belvedere
> Davenport, Iowa
> 
> "The difference between ordinary and extraordinary is that little 
> extra."

Brian, Bob, Sean, Ron, jimmy, Enzo...

Thanks for your replies, all very useful.

We've decided to go for the TTI system with the Dynomax mufflers, and 
are hoping to get it within a couple off weeks.
We dont have any worries about how well TTI's fit, but we're not too 
sure if the 'brackets' that are already supporting our max wedge (home 
made?) system are the correct design and in the correct position for the 
new hangers. I say 'home made' because a couple of the bends are quite 
flat, all joints are welded, and the hangers that we have are quite 
short with short rubber insulators. One of the reasons for getting the 
TTI's is to eliminate these small insulators, and hopefully some of our 
persistent driveline vibrations.
Brian, I'll have to see how the 3" system fits with the handbrake cable 
on our car, when we receive the parts, but the system we currently have 
(pretty sure it's 3") seems to clear at the moment.

Thanks again

Robert
63 Polara 500
England


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.