Re: Stainless brakeline recommendations
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Stainless brakeline recommendations



I made mine with stainless too. I plan on doing it again, if I can
ever get the Savoy back from the painter. If you do make your own,
make sure you get a quality bender and flalring tool. Just use some
wire to mock up the bends.


       Gary F.




On 6/18/07, Menko <menkoj@xxxxxxxxx> wrote:
Hi everyone,

I've converted my 62 Lancer over to disc brakes, and wanted to replace
all of the lines with stainless.  The problem is, there isn't exactly
a "best fit" kit out there for my application.  Thus, I wanted to get
some feedback on companies that you have worked with and liked.  There
is a list of places, like Inline, the ebay stuff, etc.  Any practical
experience?

My problem is, the 62 is *similar* to 63-66 Darts, but the kits don't
distinguish between those and later Darts, and I have discs not a
single MC now.  Ideally I'd like a longer rear line that comes forward
and get the junction up off the framerail, but I don't want to mess
with double flaring my own lines since I don't have the tools to do it
well.

Advice is welcome!


Thanks

MJ

--
Menko Johnson
http://menko.no-ip.com/portfolio
menkoj@xxxxxxxxx



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.