I ordered my 3/8" fuel line from one of the big vendors. All the brake was done by me. I bought a roll of 3/16",I think. Don't think it was stainless.I only had trouble with one flare for the prop valve.had to redo 3-4 times. And that was with a good double flare tool.Oh,I did buy small pieces of straight line where it applied and would be easier to do that. --- Menko <menkoj@xxxxxxxxx> wrote: > I thought I remembered reading that stainless was > rather difficult to > flare? I have a double flare kit (a crappy one) > that I have used for > regular lines. > > George have you ordered straight line from anywhere > you liked? > > MJ > > > On 6/18/07, george smith <bt6t4@xxxxxxxxx> wrote: > > > > Get a double flare line kit,25+ ft. of line and > make > > them yourself.Cheaper and the satisfaction is > > priceless. > > > -- > Menko Johnson > http://menko.no-ip.com/portfolio > menkoj@xxxxxxxxx > George ____________________________________________________________________________________ Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.