RE: 3 on the Tree to Floor Shifter
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 3 on the Tree to Floor Shifter



Two years ago there was a local guy selling a 64 Chrysler Newport 4 dr 
sedan with a 361 and a factory 3 speed stick on the floor. I think the 
deal was that since 64 Chryslers were push button automatics and it was 
so rare to have a 3 speed stick in a Chrysler that Mopar never made a 
steering column with a shifter on it for Chryslers. It did have what 
appeared to be the same hump in the floor that a 4 speed would have. I 
remember thinking how easy it would be to put a 440 and 4 speed in this 
car and make a real sleeper out of it. I think the same 3 speed or 4 
speed tranny will fit with a /6, small block or big block as long as you 
have the right bell housing for the motor.

Dan


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.