RE: Heater Stuff Again
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Heater Stuff Again



I bought a selection of 400 orings from Ebay a couple years ago for $20 
and I've used the hell out of it since. I used one to seal my valve and 
it worked fine. If I could remember which one I used I'd send you one. 

mcwheels@xxxxxxxxxxxx wrote:
> 
> Bill, I thought it was supposed to be a flat ring too after looking at 
> my old one but it was just flatened out from age. Trust me it's supposed 
> 
> to be an O-ring. I bought a fat one and a skinny one. The fat one 
> wouldn't let the valve go into the core far enough. The skinny one 
> worked fine. Sorry but I don't remember the exact size. I took the valve 
> 
> with me to the hardware store and found one that fit.
> 
> Dan
> 
> 
> Bill Maurits wrote:
> > 
> > SORRY that was supposed to be FLAT



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.