Re: Heater Stuff Again
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Heater Stuff Again



I went to a local place that sells O rings and took my
old one. It's not a flat one,it's round O ring.
--- Bill Maurits <Y1TopBanana73@xxxxxxxxx> wrote:

> Yup, that's exactly how mine it set up. But the
> o-ring is obviously
> not sufficient. Every time I buzz the motor up a
> little bit, it lets
> out this "BRRRRT" & pisses on my foot and the
> carpet. Got any other
> suggestions for getting it to seal?
> 
> I did find some flat 1/16" & 1/8" flat sheet rubber
> @ Lowes that I may
> try and make a supplemental gasket out of. That's
> the only other thing
> I can think of. Help?
> 
> Bill M
> 65 Coronet 500 'vert
> 
> On 3/20/07, ledman_70@xxxxxxxxxxx
> <ledman_70@xxxxxxxxxxx> wrote:
> >
> > Are the 65 and 64 B heater control valves similar
> Bill? My 64 just
> > pushes into the core with an O ring on the end and
> 2 screws to hold it
> > to the box.
> >
> > Bill Maurits wrote:
> > >
> > > I never did get my heater totally squared away
> this winter. Since I
> > > can't even get close to 3000 rpm without my
> heater control valve
> > > pissing on my foot, I need to find a gasket for
> it.
> > >
> > > SO...does anyone know of a source for FLAY donut
> gaskets? I'm looking
> > > for something that's rubber, ~1/16" thick, and
> obviously bit enough to
> > > go around the nub where the heater control valve
> goes into the heater
> > > core. Any suggestions? Any places that sell flat
> sheets of similar
> > > material that I could make it myself?
> > >
> > > Thanks
> > >
> > > Bill M
> > > 65 Coronet 500 'vert
> >
> >
> >
> > Jeff Adams
> > 64 Polara
> >
> >
> > ----
> > Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> >
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> 


George



 
____________________________________________________________________________________
Bored stiff? Loosen up... 
Download and play hundreds of games for free on Yahoo! Games.
http://games.yahoo.com/games/front


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.