RE: Power trunk and seat
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Power trunk and seat



I'm also toying with the idea of adding a power seat track to the 
driver's bucket...anyone ever done that, either? I'm sure I could modify 
a non-original track with studs or holes if I can find one close to the 
pattern and even cut a hole in the seat's side plate for the switches.
ledman_70@xxxxxxxxxxx wrote:
> 
> I'm thinking of installing a power trunk release on my 64 
> Polara...anyone ever done it or know of a good kit to use?
> 
> Jeff Adams
> 64 Polara



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.