JeffI did the power seat thing to the Coronet as wll. I found a driver's sede rack from a 68 Town and Country wagon, fabricated a couple of brackets to mount a Coronet 500 seat to the rack. The rack's mounting studs fit the holes for the bucket seat perfectly (had to do a little modification to one of the mounting studs due to the shape of the floorpan. One ground wire and one to hot and a perfectly functioning power driver's seat. Am pulling it out, fabricating new mounting brackets (if needed) and use it in my 65 Dart wagon with 65 Barracuda buckets.
Don----- Original Message ----- From: <ledman_70@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Sunday, March 11, 2007 5:52 PM Subject: RE: Power trunk and seat
I'm also toying with the idea of adding a power seat track to the driver's bucket...anyone ever done that, either? I'm sure I could modify a non-original track with studs or holes if I can find one close to the pattern and even cut a hole in the seat's side plate for the switches. ledman_70@xxxxxxxxxxx wrote:I'm thinking of installing a power trunk release on my 64 Polara...anyone ever done it or know of a good kit to use? Jeff Adams 64 PolaraJeff Adams 64 Polara ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!'62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.