RE: Pushbutton probs cont..

[Richard Kinsley <r.kinsley@xxxxxxxxxxxxxxxx>]

Robert Lane wrote:

> (See pics on link below)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
> Even with the oil-pan dropped, we couldn't see for definite how the 
> cable separates from the mechanism inside, so we opted to leave the 
> cable attached and just try and re-adjust it.
  - - - - - - - - - - - - - - - - - - - - -  -- - - - - - - -  - - - 

> 
> Best Regards
> 
> Robert
> 63 Polara 500
> England
--------------------------------------------------------------------

Really nice pictures Robert! As I recall we took a tiny flat blade 
screwdriver and inserted it alongside the cable after it was  unbolted. 
Then we had to feel around and managed to push back on the retainer 
spring to free it. It did take a few tries but we were successful.

Good Luck.
Rich Kinsley  '64 Polara 4 dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.