Re: moving on, was 273 disaster, questions

[Ted Albin <albinted@xxxxxxx>]

hi
copper showing is bad, getting fuel in the oil. i think mr gaskets valve  
cover gaskets are the best but couldn't say about the rest of their stuff cause  
felpro took over. i suspect mr gaskets kit may be better all the way around. i 
 think blowin oil out the rings is way far better than puttin fuel in the  
crankcase. i got a defective set of rings from sealed power that had the bezel  
almost half way across the surface in several but not all of the set. blowby 
was  huge; the bezel was standard in all but three or four of the rings which 
were  extremely far off. i didn't catch it. i still have the rings in my tool 
box  because im retarded and need physical evidence to show. 

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@