RE: BillM
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: BillM



Schuyler my heater is hooked up the same way with an underhood valve but 
I found out that Douchllon Performance sells a valve that works in the 
opposite direction for just this purpose so my lever works in the right 
direction. Here's the link:

http://www.bouchillonperformance.com/BPEheaterValve.asp

Dan



Schuyler Wrobel wrote:
> 
> my heater valve failed along time ago, and was rusted out pretty bad.
> so, I had it welded up, and ran a cable out to an inline valve I  
> installed
> in the heater hose inlet side. It works great except the lever on the  
> dash
> now works backwards. that was about 15 years ago and no leaks. but
> you should be able to get it fixed properly now a days. I think there's
> some info on the websites tech/restoration section.
> 
> Schuyler
> 62 Dodge Dart 440 wagon w/ Poly 318
>   <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
> FYI - I Do the Decal designs for the Poly head 318 and more! email me  
> with your needs -
>   <schuyler62@xxxxxxxxxxxxx>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.