Re: Cams

[Jim500mopar@xxxxxxxxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caaegt3bOyW3Na/PC PowerScan
-------------------------------------------------------------------


Hughes also makes the "bee-hive" springs, I've got a set in my Edelbrock 
heads, they match the 533 lift hydraulic roller cam in my 495 wedge.  Comp is 
always a good choice, but Hughes isn't too shabby, have used them twice no 
problems.

If you get the bee-hives, be aware that (at least with the Hughes set) you 
will have to do a two-stage break-in method of the outer spring first, then add 
in later the inner springs.  The exception to this is hydraulic roller cams, 
can install both same time. 

--
[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
So Much Television, Such Little Time!  In Love with Lost(TM) or 
Devoted to Desperate Housewives(TM)? Take our premier week 
survey, complete our offers, and get a FREE* DVD set of either 
show!
caaeg05bOyW3Nf/Viewer Survey
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.