Superstock Springs

[John <moparbikeguy@xxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Ben & Jerry?s® or Häagen-Dazs®?
Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 
Restaurant Gift Card of your choice or $100 worth of Ben & 
Jerry?s® or Häagen-Dazs® ice cream for participating!
caadVYQbOyW3Na/Ice Cream Research Survey
-------------------------------------------------------------------


I just finished installing a new set of superstock springs and all the related parts (hangars, shackles, U bolts, long shocks)in my '65 Coronet. I noticed that after torqueing down the right spring U bolts, the pad on the left axle tube was not touching the spring in the front, only the back of the pad was touching. It was off by a good 5 degrees. I took everything apart, checked everything with an angle finder, and it seems that the spring are at different angles where the axle tube sits; the axle is OK. I torqued everything down to factory specs, and everything tightened into place, but it just doesn't seem right. Has anyone else had a problem like this, or is this normal pre-load?
-- 
'65 Coronet 500
500 CID Wedge


__________________________________________________________________
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register

Netscape. Just the Net You Need.

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp

[AD removed for archives]
-------------------------------------------------------------------
Get $1000.00 Overnight! Fast and Easy!
No Credit Checks! Many Lenders are 100% Paperless!
Let The Wizard Find the right Lender for you!
caadVJ5bOyW3Nf/911PaydayAdvance
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.